Montana Fire Pits is a handmade, direct-sold premium gas fire table brand from Missoula, Montana. It is a genuine alternative to a landscape architect specifying a custom fire feature — and it is not an alternative to anything you can buy on Amazon, which is the single most useful thing to know before you spend an afternoon comparing them. If you are furnishing a patio you intend to keep, and you want the fire feature specified the way the rest of the hardscaping is, the proposition makes sense. If you mainly want flame on a patio for the least money, you are on the wrong page and our gas fire pit picks are the right one.
A note on what this review is and is not. Everything below comes from the company’s own published material, read on a dated visit and cited at the foot of this page. We have not burned one, we have not measured one, and we are not going to pretend otherwise — that is the standing policy for every page on this site, set out in how we pick. Because Montana Fire Pits sells direct rather than through Amazon, there is also no live price on this page, and we will not publish an estimated one. Our prices come from a daily Amazon check and carry the date they were pulled; where we cannot verify a number, we say so instead of filling the gap.
What Montana Fire Pits actually sells
Gas fire tables and fire pits, in named collections, plus the components that go with them. The site names the Venture Series, the Arbor Collection, the Studio Series, the Timberline Collection and a Ready to Finish line, and separately sells burners, covers, fire glass, lava pebbles and wind guards.
That accessory list tells you what kind of company this is. Burners, fire glass and lava pebbles are the components of a built gas fire feature, not the contents of a box that arrives finished. The Ready to Finish line makes it explicit: it is intended for builds where the fire table is clad or finished on site to match the surrounding stonework. This is a brand that expects to be part of a landscaping project.
The company describes itself as having been “Elevating outdoor living spaces across North America since 2002”, states that its pits are “Handmade in Montana”, and runs a Trade Program for landscape architects, designers, contractors and builders with trade pricing and dedicated account management. Twenty-plus years and a trade channel is a meaningful signal in a category full of labels that appeared last season.
The materials, and why they matter
The site names three: premium mild steel, 10 gauge corten, and marine grade aluminum. The Arbor Collection additionally uses thermally modified wood from Arbor Wood Co.
These are not price-led choices and it is worth understanding what each one buys:
- Corten is weathering steel. It forms a stable rust-brown patina that protects the steel underneath instead of corroding through it, which is why it is used for permanent outdoor installations. The honest caveat, which applies to any Corten object: runoff can stain pale concrete and light pavers in the first rains. We say the same about the Corten Breeo pits.
- Marine grade aluminumneither rusts through nor cracks. It is the buy-it-for-life material in outdoor fire products, and it is the reason cast aluminum chimineas cost what they do — see our chiminea picks.
- Thermally modified wood is heat-treated to resist rot and movement without chemical preservatives. On a fire table it is a surface material, not a structural one.
A 10 gauge corten body is specified several steps above what a mass-market propane fire table uses, and that is most of the price difference right there.
Who Montana Fire Pits suits
Buy from them if:the fire table is part of a patio build you are doing properly; you want the material specified rather than described as “steel”; you are working with a designer or contractor and the trade channel is useful to you; or you want something handmade in a known place by a company that has been doing it since 2002. Financing is available on the site, which fits a considered purchase.
Do not buy from them if:you want the cheapest flame on a patio; you want to compare a live price before committing today; you want a wood fire rather than gas; or you are not sure you will even use a fire table — in which case spend a hundred dollars finding out first, which is exactly what the cheap tabletop pick below is for.
The last point is the one we would press hardest. A gas fire table is a format some people love and others find underwhelming, because a gas flame radiates much less usable heat than its BTU rating suggests— a lot of the energy goes straight up, past everyone. Our fire pit tables page is honest about this. Finding out you prefer a wood fire after commissioning a handmade gas table is an expensive way to learn it.
What we could not verify
In the interest of being straight with you: the homepage does not publish a price range, and it does not set out full warranty terms — a warranty page is referenced but the terms are not on the page we read. We have no independently verified dimensions, BTU ratings or certifications for individual models, and no ownership reports we can stand behind. If you are seriously considering one, ask them directly for the warranty document, the BTU rating and the certification for the specific model, and get the lead time in writing — handmade means built to order, and built to order means a wait.